oxygen cylinder regulator — stable outlet pressure from every oxygen cylinder
An oxygen cylinder regulator from REAL GAZ reduces the high pressure of a full oxygen cylinder, commonly 150 to 200 bar, to a steady working pressure that downstream equipment can use safely.
Each unit is built with oxygen-clean brass bodies, degreased internals and a two-gauge layout showing both cylinder contents and delivery pressure.
Each unit is built with oxygen-clean brass bodies, degreased internals and a two-gauge layout showing both cylinder contents and delivery pressure.
REAL GAZ supplies this product according to ISO 2503, EN ISO 10524 and ISO 15001 oxygen-compatibility principles, suitable for industrial, workshop and laboratory use.
🏭 Where Oxygen Cylinder Regulators Are Used
- ⚙️ Oxy-fuel cutting and welding — a cylinder regulator holds the cutting oxygen pressure constant while the torch is adjusted;
- 🔬 Laboratory furnaces — controlled oxygen feeds support combustion analysis and oxidation experiments;
- 🏥 Workshop and rescue kits — portable cylinders with regulators supply oxygen for non-medical industrial safety equipment;
- 🚀 Process enrichment — small oxygen flows are metered into burners and reactors to raise flame temperature.
💡 Why Choose REAL GAZ
- ✅ Oxygen-clean assembly — regulators are cleaned and bagged before dispatch so no hydrocarbon film reaches the gas stream;
- 🧪 Correct outlet ranges — low, medium and high delivery ranges are offered so the spring never works at the extreme of its scale;
- 🎯 Matched connections — inlet threads follow the national cylinder valve standard of the destination country;
- 🔒 Safety features — a relief valve and shatter-resistant gauge lens protect the operator if a diaphragm fails;
- 📄 Certificate of Analysis (CoA) — supplied with every order, together with test documentation where applicable.
📋 Selection & Handling Tips
- Fit only to cylinders marked for oxygen and never apply oil or grease to threads;
- Open the cylinder valve slowly with the regulator adjusting screw backed off;
- Check the connection with a leak-detection fluid approved for oxygen service;
- Store regulators capped and dry between uses to keep seats free of dust.
🔬 Quality Control & Safety
- careful cleaning and inspection of every component;
- pressure integrity and leak testing before dispatch;
- gauge and relief valve function checks;
- clear marking of gas service and working range.
Regulators are leak tested at working pressure and checked against EN ISO 2503 performance classes. Cylinders and fittings comply with ADR / UN transport rules and relevant EN/ISO standards.
📦 Supply & Support
Typical cylinders in this service are 10, 40 and 50 litre steel bottles filled with oxygen at a purity of 99.5 percent or better, and each regulator is supplied with a data plate stating gas service, maximum inlet pressure and outlet range. Many customers choose to exchange empty cylinders on a regular schedule so the same regulator moves from bottle to bottle, which keeps downtime short and reduces handling. Our staff can also supply hose clips, spare gauges and thread adaptors that suit the regional cylinder standards of each market. Operators should also receive a short briefing on safe opening, leak checking and shutdown routines, which we are glad to provide with the first delivery to any new site.
⚙️ Trusted Gas Solutions
REAL GAZ supplies every oxygen cylinder regulator together with cylinders, hoses and flashback protection for customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, and our engineers help match each regulator to the cylinder and application.
REAL GAZ — oxygen delivered at the pressure you set.