R-32 Cylinder — safe, traceable refrigerant packaging
An R-32 cylinder from REAL GAZ delivers difluoromethane (HFC-32, CH₂F₂, CAS 75-10-5) in a pressure vessel that has been inspected, cleaned and evacuated before filling. The cylinder is as important as the gas itself: a damaged valve, residual moisture or air left inside can ruin a refrigeration circuit.
Each R-32 cylinder is filled from a purified single-component product and labelled with the hazard pictograms required for a mildly flammable A2L refrigerant.
Each R-32 cylinder is filled from a purified single-component product and labelled with the hazard pictograms required for a mildly flammable A2L refrigerant.
REAL GAZ supplies R-32 cylinders according to ISO 817 classification, EN 378 safety practice and TPED pressure-equipment rules, suitable for field service and workshop use.
Choosing the right R-32 cylinder also means thinking about logistics. Small service cylinders are easy to carry up a ladder or into a plant room, while larger trade cylinders cut the number of changeovers on a big installation. We keep track of retest dates and valve condition so that a cylinder leaving our depot is fit for the next filling cycle, and we label each one so that mixed stock on a van or shelf can be sorted at a glance.
🏭 Where R-32 Cylinders Are Used
- ⚙️ Split air-conditioner installation — technicians carry a cylinder to charge or top up residential and light-commercial splits designed for R-32;
- 🔬 Heat pump servicing — air-to-water and air-to-air heat pump engineers use cylinders to recharge circuits after repair or component replacement;
- 🏥 Refrigerant recovery and reclaim — empty or part-full cylinders are used with recovery units when R-32 systems are decommissioned;
- 🚀 OEM production lines — appliance and chiller factories draw R-32 from cylinder manifolds for charging stations.
💡 Why Choose REAL GAZ
- ✅ Inspected cylinders — every vessel is checked for test date, thread condition and valve integrity before filling;
- 🧪 Clean filling — evacuation and purge steps remove air and moisture so the refrigerant arrives dry;
- 🎯 Right size for the job — handy service sizes and larger trade cylinders are available to match your charge weights;
- 🔒 Correct labelling — hazard labels, UN number and net weight are clear for customs, drivers and technicians;
- 📄 Certificate of Analysis (CoA) — supplied with every order, listing purity and moisture for the filled lot.
📊 R-32 Cylinder Handling Notes
- Difluoromethane boils at about −52 °C at atmospheric pressure, so a cylinder holds liquid under its own vapour pressure;
- Store upright or as marked, away from heat sources, and never above 50 °C;
- Keep valve caps fitted during transport and use a trolley or chain for secure positioning;
- Weigh the cylinder on scales when charging; never rely on pressure alone, because R-32 is a single-component refrigerant;
- Ventilate the work area and remove ignition sources before connecting hoses, since R-32 is classed as A2L.
🔬 Quality Control & Safety
- multi-stage purification of the refrigerant;
- cylinder inspection and evacuation before filling;
- moisture, acidity and non-condensable analysis;
- leak testing of valves and pressure integrity checks.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ supplies every R-32 cylinder with documentation, traceable batch data and technical advice to customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Our team can help you choose cylinder size, valve type and delivery arrangement for installers, wholesalers and manufacturers.
REAL GAZ — clean refrigerant, ready to charge.