Compressed Argon — inert shielding gas in high-pressure cylinders
Compressed Argon from REAL GAZ is a colourless, odourless noble gas supplied in steel cylinders at working pressures up to 200 bar, ready for welding bays, workshops and process plants.
Each fill is purified, analysed and sealed so that the argon reaching your point of use behaves as a truly inert, predictable atmosphere.
Each fill is purified, analysed and sealed so that the argon reaching your point of use behaves as a truly inert, predictable atmosphere.
REAL GAZ fills cylinders in line with ISO 9809, EN 1964 and the TPED framework, with purity grades suited to fabrication and process duties.
Argon makes up roughly 0.93 % of the atmosphere and is recovered by air separation. Because it does not react with metals, oils or most process media, compressed argon is the default choice wherever oxygen and nitrogen must be kept away from a hot or sensitive surface. Standard 10, 20, 40 and 50 litre cylinders are available, and larger bundles can be arranged for continuous demand.
Storage and use deserve the same attention as purchase. Keep cylinders in a cool, dry, ventilated place away from ignition sources and corrosive atmospheres, and always secure them with chains or brackets. Open the valve slowly, check connections with leak-detection fluid rather than a flame, and close the valve fully after each shift. Return empty cylinders with the valve closed and the cap on, so residual pressure protects the interior from moisture. Following these simple habits preserves gas quality and extends the service life of both cylinders and regulators.
🏭 Where Compressed Argon Is Used
- ⚙️ TIG and MIG welding — compressed argon shields the weld pool from oxygen on stainless steel, aluminium and titanium;
- 🔬 Furnace atmospheres — heat-treatment lines use argon to prevent oxidation and scaling of metal parts;
- 🏥 Equipment purging — pipework and vessels are purged with dry argon before commissioning or maintenance;
- 🚀 Metal powder production — atomising and additive-manufacturing plants rely on inert argon to protect reactive powders.
💡 Why Choose REAL GAZ
- ✅ Consistent filling — every cylinder is filled to a verified pressure and labelled with its content;
- 🧪 Dry, clean gas — low moisture and oxygen levels protect weld quality and sensitive processes;
- 🎯 Flexible cylinder sizes — from small workshop cylinders to large packs for production lines;
- 🔒 Safe handling support — valves, caps and guidance are matched to the pressure rating of each cylinder;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- multi-stage purification of every argon batch;
- accurate cylinder pressure and weight checks;
- dew point and trace oxygen analysis;
- valve leak testing before dispatch.
Compressed argon is non-toxic but an asphyxiant in confined spaces, so storage areas should be ventilated and cylinders kept upright and secured. Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ delivers Compressed Argon to fabricators, laboratories and manufacturers across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, backed by cylinder rental, refilling and technical advice.
REAL GAZ — compressed argon you can rely on.