Technical Hydrogen for laboratories — practical H₂ for routine laboratory work
Technical hydrogen for laboratories from REAL GAZ suits routine work where cost control matters, but the gas must still be dry, clean and predictable.
It is typically supplied at 99.99% purity and above in 10 L and 20 L cylinders that fit under benches and in gas cabinets.
It is typically supplied at 99.99% purity and above in 10 L and 20 L cylinders that fit under benches and in gas cabinets.
Cylinders follow ISO 9809 and EN 1964, while laboratory installations should respect EN ISO 7291 guidance on pressure regulators and local gas cabinet rules.
For FID detectors, hydrogen flow is commonly 30 to 45 mL/min, so a 10 L cylinder at 200 bar can last many weeks. Consider a flow limiter and an excess flow valve on indoor lines. Leak detection with soap solution or electronic sniffers should be a part of every cylinder change.
Teaching laboratories and small testing rooms often ask whether a cylinder or a generator is better. A cylinder needs no electricity, delivers a stable pressure and has no start-up delay, but it must be stored and exchanged. A generator removes the storage but needs water, power and service. We help weigh these points honestly, and many customers keep one cylinder as a standby so that analysis never stops during maintenance. Whenever a new analyst joins, we are glad to run a short briefing on cylinder changes, line purging and leak checks, because careful routine habits do more for laboratory safety than any single piece of equipment. Consumption logs are useful: note the date and pressure when a cylinder is connected, and the date it is empty, then send us the figures. We can then set a delivery frequency that suits your real usage.
🏭 Where Technical Hydrogen Is Used
- 🔬 FID fuel gas — flame ionisation detectors burn hydrogen with air to measure organic compounds;
- 🧪 Teaching laboratories — demonstration of reduction reactions and gas properties under supervision;
- ⚙️ Materials testing — hydrogen environments support embrittlement and corrosion studies;
- 🏭 Quality control — in-house labs of manufacturers use H₂ for sample preparation and analysis.
💡 Why Choose REAL GAZ
- ✅ Compact formats — small cylinders reduce stored volume and ease compliance in buildings;
- 🧪 Reliable baseline — consistent purity gives stable detector baselines;
- 🎯 Complete kit — regulators, tubing, arrestors and leak detectors available together;
- 🔒 Training notes — clear guidance on connection, purging and storage for new staff;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- drying and purging of every cylinder;
- verification of purity before filling;
- moisture checks on sampled lots;
- valve and thread inspection.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ provides technical hydrogen for laboratories in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, with scheduled cylinder exchange so that your instruments never wait for fuel gas.
REAL GAZ — fuel for the lab, safe by design.