Technical Gas R-410A — Reliable HFC Refrigerant for Modern Cooling
Technical Gas R-410A from REAL GAZ is a near-azeotropic HFC refrigerant blend made of 50 % difluoromethane (R-32) and 50 % pentafluoroethane (R-125) by weight. It operates at higher pressure than R-22, which allows compact, efficient heat exchangers in modern equipment.
Each batch is blended gravimetrically and checked for composition, moisture and non-condensable gases before it is filled.
Each batch is blended gravimetrically and checked for composition, moisture and non-condensable gases before it is filled.
REAL GAZ supplies R-410A in line with ISO 817 (safety class A1), EN 378 system requirements and the purity limits of AHRI 700, suitable for installation and service work.
🏭 Where R-410A Is Used
- ⚙️ Split and multi-split air conditioners — residential and commercial units designed for R-410A use its higher working pressure for compact coils;
- 🔬 Heat pumps — reversible heating and cooling systems rely on the refrigerant for stable year-round performance;
- 🏥 Chillers and rooftop units — packaged systems in offices, shopping centres and hotels are charged with R-410A at the factory or on site;
- 🚀 Service and retrofit work — technicians need clean, dry refrigerant for topping up and recharging after leak repairs.
💡 Why Choose REAL GAZ
- ✅ Defined composition — the 50/50 weight ratio is controlled so that charge calculations remain accurate;
- 🧪 Low moisture — dry refrigerant protects compressors, expansion valves and POE oils from acid formation;
- 🎯 Right-sized packs — cylinders suit both a single service call and a large installation project;
- 🔒 Compliance awareness — documentation supports F-gas record keeping and safe handling on site;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- liquid-phase sampling for composition;
- moisture and acidity measurement;
- non-condensable gas check;
- leak testing and valve integrity checks.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
📦 Handling and Storage
R-410A must always be charged as a liquid from the cylinder, because the two components have different vapour pressures. Use gauges and hoses rated for at least 45 bar, never mix it with R-22 or R-407C, and recover used refrigerant into a dedicated recovery cylinder. Store cylinders upright, away from heat above 50 °C, and secure them against falling. Wear gloves and eye protection when connecting hoses, because liquid release causes cold burns. Because R-410A operates at roughly 60 per cent higher pressure than R-22, equipment must be designed for it, and existing R-22 systems cannot simply be converted. Its global warming potential of 2088 places it under phase-down rules in many regions, so accurate charging, leak checks and record keeping matter. Our team can explain recovery, reclaim and disposal routes for used cylinders, and advise when lower-GWP alternatives such as R-32 may suit a new project.
⚙️ Trusted Gas Solutions
REAL GAZ supplies Technical Gas R-410A to installers, wholesalers and maintenance companies in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, with documented traceability from filling to delivery.
REAL GAZ — clean refrigerant, confident cooling.