Technical Gas Carbon Monoxide — cost-effective CO for general technical applications
Technical gas carbon monoxide from REAL GAZ is the practical choice when an application needs reliable CO but not the extreme purity of research grades. It is supplied compressed in steel cylinders ready for connection to a suitable regulator.
Technical grades are normally offered at 99.0% to 99.5% minimum, with the main impurities nitrogen, hydrogen, methane and carbon dioxide declared on the analysis report.
Technical grades are normally offered at 99.0% to 99.5% minimum, with the main impurities nitrogen, hydrogen, methane and carbon dioxide declared on the analysis report.
REAL GAZ supplies this product with analysis traceable to ISO 17025 practice, filled into cylinders built to ISO 9809 and approved under TPED, for workshop, plant and test-bench use.
Technical grades are not intended for trace analysis, but they must still be dry and free of particles that could block regulators. Typical specifications limit moisture to a few tens of ppm, and users should check that the nitrogen and hydrogen content will not interfere with the intended reaction. If your process later demands tighter limits, switching to a purer grade is easy because cylinder fittings and regulators remain the same. We also advise on the minimum cylinder residual pressure that keeps the gas quality consistent. Orders may be placed for a single cylinder to test suitability before a larger commitment is made.
🏭 Where Technical-Grade Carbon Monoxide Is Used
- ⚙️ Reducing atmospheres — small furnaces and laboratory-scale reactors use CO to reduce metal oxides under controlled temperature;
- 🔬 Chemical intermediates — batch operations convert CO into phosgene precursors, formates and other intermediates under strict plant procedures;
- 🏥 Gas detector testing — safety teams use technical CO to bump-test portable and fixed detectors in refineries and mines;
- 🚀 Training and demonstration — approved training facilities use diluted supplies to demonstrate toxic gas hazards to operators.
💡 Why Choose REAL GAZ
- ✅ Sensible specification — you pay for the purity your process needs rather than for research-grade performance;
- 🧪 Documented impurities — the analysis report states the main contaminants so engineers can judge suitability before use;
- 🎯 Reliable cylinder condition — cylinders are inspected, valved and labelled to current transport rules;
- 🔒 Clear technical advice — we explain when technical grade is adequate and when a higher grade avoids problems;
- 📄 Certificate of Analysis (CoA) — provided on request and with each batch, showing the measured purity of the technical grade supplied.
🔬 Quality Control & Safety
- visual and periodic inspection of every cylinder;
- pressure and fill-weight verification;
- analysis of carbon dioxide, moisture and oxygen content;
- valve leak tests with approved detection fluid.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards. Technical carbon monoxide must only be used with regulators and pipework rated for toxic, flammable gas.
⚙️ Trusted Gas Solutions
REAL GAZ delivers technical gas carbon monoxide to customers across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. If you are unsure whether technical grade suits your process, send us the application details and our team will recommend a grade and cylinder size.
REAL GAZ — the right grade, not the highest price.