Technical Compressed Air for laboratories — an economical air grade for general laboratory duties
Technical compressed air for laboratories from REAL GAZ suits the many tasks that need clean pneumatic air but not the extreme specification of zero air.
It is dried and filtered, which protects glassware, valves and small instruments from water and oil.
It is dried and filtered, which protects glassware, valves and small instruments from water and oil.
Air is delivered to ISO 8573-1 practical classes, in cylinders conforming to EN 1964 with fittings compatible with EN ISO 5145 outlet conventions.
Not every task justifies zero air. Drying glassware, powering a vacuum-filtration setup or running a pneumatic stage needs only clean, dry air at moderate pressure. Using technical grade for such tasks keeps expenses sensible and frees the budget for specialty grades on critical analysers. A 10 or 20 litre cylinder is often sufficient for a single laboratory, and a simple single-stage regulator with a fine needle valve gives adequate control. Remember to fit a pressure relief on any closed vessel you pressurise, to wear eye protection, and never to point an air jet at skin. Our team can provide a short handling note on request. Where a department shares cylinders between rooms, we recommend a labelled trolley, so that nobody moves a cylinder without securing it. Keeping one regulator permanently fitted to each cylinder also reduces repeated connection work and prevents thread wear, which is a common cause of small leaks.
🏭 Where Technical Air for Laboratories Is Used
- ⚙️ Fume cupboard and glassware drying — a gentle stream of dry air speeds up drying of flasks and condensers without residues;
- 🔬 Pneumatic laboratory equipment — autoclave controls, sample changers and clamps use air as an actuation medium;
- 🏥 Pressure filtration — membrane and column filtration are driven with controlled air pressure;
- 🚀 Teaching laboratories — students learn gas handling with a safe, non-toxic gas and standard regulators.
💡 Why Choose REAL GAZ
- ✅ Economical choice — pay only for the quality your task needs, saving higher grades for sensitive analysers;
- 🧪 Dry supply — moisture control protects metal parts and electronic components;
- 🎯 Easy handling — non-flammable air simplifies storage and risk assessment;
- 🔒 Straightforward ordering — small cylinder sizes suit low-consumption benches;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- drying and filtration of the feed air;
- moisture and oil checks per batch;
- regulator thread and valve inspection;
- leak testing of every cylinder before dispatch.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
For general bench duties, technical compressed air for laboratories from REAL GAZ offers practical quality at a sensible specification, backed by delivery and advice for laboratories in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — The right grade for the right task.