S₂+ Helium 200/0,6 bar — a helium regulator for 200 bar cylinders
The S₂+ Helium 200/0,6 bar designation describes a pressure regulator for helium, with a maximum inlet of 200 bar from the cylinder and a low outlet pressure range up to 0,6 bar.
This type of low-pressure delivery suits applications where helium must reach an instrument or a fill point gently, with fine control and without the risk of overpressurising delicate equipment.
This type of low-pressure delivery suits applications where helium must reach an instrument or a fill point gently, with fine control and without the risk of overpressurising delicate equipment.
Regulators are specified with reference to ISO 2503 and EN ISO 10524-1, with helium cylinders made to ISO 9809 and valves to EN ISO 10297.
Helium is light, inert and difficult to contain, so every joint in a helium line deserves care. Use clean fittings, avoid sealing tape on metal-to-metal seats and check for leaks with a helium leak detector or approved fluid. Open the cylinder valve slowly, turn the regulator handle to set the outlet and watch the low-pressure gauge, since 0,6 bar is a small pressure that is easy to exceed with a heavy hand. Purge the line before use when purity matters. Store cylinders upright and secured, and close the cylinder valve at the end of each shift.
🏭 Where the S₂+ Helium Regulator Is Used
- 🔬 Gas chromatography — helium carrier gas needs stable, low delivery pressure at the instrument inlet;
- 🔍 Helium leak detection — vacuum chambers and sealed components are tested with a gentle, controlled helium supply;
- 🎈 Balloon and display filling — low outlet pressure allows safe, steady filling of foil and latex balloons;
- 🧬 Research laboratories — cryogenic and spectroscopy set-ups rely on clean regulated helium at modest pressure.
💡 Why Choose REAL GAZ
- ✅ Matched pressure range — 200 bar inlet suits standard helium cylinders and 0,6 bar outlet suits delicate lines;
- 🧪 Clean construction — metal-seated, degreased components help preserve helium purity;
- 🎯 Fine outlet control — a low-pressure gauge allows accurate setting, which is valuable at small flows;
- 🔒 Helium cylinder supply — regulator and cylinder can be ordered together, in matching connection types;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- helium leak testing of the regulator body;
- inlet and outlet pressure gauge verification;
- cleanliness inspection for high-purity service;
- check of connection type against cylinder valve.
Helium cylinders comply with ADR / UN rules (UN 1046) and are made to ISO 9809 and EN 1964 standards.
⚙️ Trusted Gas Solutions
REAL GAZ supplies S₂+ Helium 200/0,6 bar regulators with helium cylinders to laboratories, workshops and event suppliers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Tell us your cylinder connection and application, and we will confirm the correct set-up.
REAL GAZ — gentle, controlled helium delivery.