Propane Gas Cylinder Regulator

Propane Gas Cylinder Regulator — the right fitting between your cylinder and your equipment

A Propane Gas Cylinder Regulator from REAL GAZ screws or clips directly onto the cylinder valve and sets the pressure at which gas leaves the vessel. Fit and compatibility matter as much as performance here: propane cylinders use left-hand or country-specific connections, and a regulator that does not match the valve can never be used safely.
We help you identify the correct outlet before you order.

Many markets use different valve outlets for propane, including left-hand W21.8 threads, clip-on bayonet types and country-specific nuts. Sending us a photograph of the valve or the cylinder markings usually lets our staff confirm the correct regulator within a short exchange of messages.

REAL GAZ supplies this product according to EN ISO 10297 valve interface practice, EN 13953 and related standards, suitable for portable, workshop and site use.

🏭 Where Propane Cylinder Regulators Are Used

🧰 Mobile workshops — tradespeople bring a cylinder, regulator and torch to the job without needing a fixed pipework system;
🎪 Events and outdoor catering — temporary kitchens and heaters are fuelled from individual cylinders with direct-mount regulators;
🏞️ Remote camps and sites — off-grid locations rely on a straightforward cylinder-and-regulator arrangement for cooking and heating;
🚢 Marine and workboats — galleys and heaters on small vessels use compact regulators in tightly ventilated lockers.

💡 Why Choose REAL GAZ

✅ Correct connection — we confirm thread type and valve standard so the regulator seats first time;
🧪 Durable build — brass bodies and sealed adjusters survive repeated fitting and site handling;
🎯 Right pressure for the job — fixed and adjustable versions are offered for different appliances;
🔒 Safe changeovers — design details help operators detect leaks as soon as the cylinder is connected;
📄 Certificate of Analysis (CoA) — supplied with every order.

🔬 Quality Control & Safety

valve connection thread and sealing-face checks;
outlet pressure testing at working inlet pressures;
body, gauge and diaphragm inspection;
leak testing of inlet seal and outlet fittings.

Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.

📋 Fitting and Removing the Regulator

close the cylinder valve and let the line vent before disconnecting;
check that the sealing washer or face is present and undamaged;
tighten with the correct spanner without excessive force and never use PTFE tape on a face seal;
carry out a soapy-water leak test every time a new cylinder is attached.

Treat every cylinder as a pressure vessel. Carry it upright, keep the valve protected, never roll it on its base ring over rough ground, and keep the regulator capped or covered while in transit so the inlet stays clean and the gauge undamaged.

⚙️ Trusted Gas Solutions

REAL GAZ supplies cylinders, valves and each Propane Gas Cylinder Regulator you need for them in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Tell us your cylinder type and appliance and we will supply a combination that connects correctly and works safely.

REAL GAZ — the connection that fits first time.