Precision Argon Gas — accurately controlled argon for measurement-critical work
Precision Argon Gas from REAL GAZ is argon prepared and tested for applications where small changes in composition produce visible changes in results.
Purity, cylinder cleanliness and fill pressure are all controlled and recorded.
Purity, cylinder cleanliness and fill pressure are all controlled and recorded.
Analysis is traceable through ISO 17025 methods, and blending work follows ISO 6142-1 where argon forms part of a calibration or reference mixture.
Precision in a gas supply means more than a high percentage. It means the same trace levels in the first and last litre of a cylinder, and a regulator that does not release what it absorbed. REAL GAZ conditions cylinders, uses passivated valves and checks residual pressure before release, so argon performs identically from a full cylinder down to the last bar.
Precision depends on the whole delivery chain. Select a two-stage stainless regulator with a metal diaphragm, keep tubing as short as practical, and purge the line at least ten times its volume after any change of cylinder. Avoid tape or grease on fittings, as these can outgas. REAL GAZ also helps users verify performance by comparing instrument baselines before and after a cylinder change, so unusual drift can be traced to its true cause rather than blamed on the gas. On request we document the cylinder preparation steps and the analytical method used, so your quality system has the evidence it needs for audits.
🏭 Where Precision Argon Is Used
- ⚙️ Spectrometer purging — argon-filled optical paths keep ultraviolet lines free of absorption;
- 🔬 Calibration mixtures — argon acts as balance gas in reference blends for analysers;
- 🏥 Electron-beam and laser work — precisely controlled argon assists cutting and sealing of fine components;
- 🚀 Semiconductor tools — etch and sputter processes depend on argon with stable trace levels.
💡 Why Choose REAL GAZ
- ✅ Stable composition — trace content remains steady through the cylinder life;
- 🧪 Conditioned cylinders — internal surfaces are prepared to hold low moisture;
- 🎯 Tailored grades — we help you match purity to the sensitivity of the method;
- 🔒 Chain of record — fill, analysis and release data are stored against the batch;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- fine purification and gas polishing;
- gravimetric preparation for blended standards;
- analytical checks on oxygen, moisture and hydrocarbons;
- helium leak testing of critical valves.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards, with outlet connections matched to your equipment.
⚙️ Trusted Gas Solutions
REAL GAZ offers Precision Argon Gas to metrology institutes, electronics plants and testing laboratories in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — measured purity, delivered with care.