Oxygen Regulator №3 — a catalogue reference for regular oxygen duty
Oxygen Regulator №3 is a catalogue reference at REAL GAZ for a medium-duty regulator that serves routine cutting, heating and general oxygen tasks.
It is cleaned for oxygen, tested for tightness and supplied with fitting instructions.
It is cleaned for oxygen, tested for tightness and supplied with fitting instructions.
The range follows EN ISO 2503 and EN 837 gauges, suitable for technical and service teams.
🏭 Where Oxygen Regulators Are Used
- ⚙️ Garage workshops — regular cutting of exhaust and chassis parts;
- 🔬 Pipe fitting — gas-welded joints in heating and plumbing work;
- 🏥 Machine repair — heating seized parts before removal;
- 🚀 Light industry — small production units with intermittent use.
💡 Why Choose REAL GAZ
- ✅ Balanced specification — covers typical workshop needs;
- 🧪 Clean supply — free from oil and grease;
- 🎯 Straightforward fitting — clear instructions with each unit;
- 🔒 Reliable service — tested before dispatch;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- degreasing;
- gauge check;
- leak testing;
- packing in sealed bags.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
📦 Fitting and Handling Notes
Confirm the cylinder connection type before ordering, because outlets differ between regions. Replace worn washers, and test all joints for tightness whenever the regulator is moved to a new cylinder.
The №3 reference suits those who want a single dependable regulator for several jobs. A typical specification has an inlet gauge covering full cylinder pressure of around 200 bar and an outlet gauge reading to roughly 10 bar, with a brass body and a connection chosen for your valve type. Because exact details vary with stock and destination country, we always confirm the configuration in writing before dispatch. Customers value this approach because it avoids the frequent problem of buying a regulator that physically cannot be fitted to the cylinder on site.
As with every oxygen product, cleanliness is a part of the specification. Regulators are degreased, dried and sealed at the end of the process. Keep the sealing bag until fitting, and do not handle the connection with oily hands. After installation, open the cylinder valve slowly, check the inlet gauge, set the pressure and test every joint for leaks before beginning work. Never leave a pressurised regulator unattended overnight; close the valve, release the pressure and cap the outlet. Please ask us for the safety data sheet and operating guidance for oxygen equipment, and share them with every operator who will use the regulator on your site.
⚙️ Trusted Gas Solutions
REAL GAZ offers oxygen regulator №3 for customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. If your duty is heavier or more precise, we will propose another model from our range.
REAL GAZ — dependable oxygen regulation, reference №3.