Oxygen Flow Control Regulator — regulated oxygen with a clear flow reading
An Oxygen Flow Control Regulator includes a flow scale so the user can set oxygen delivery directly in litres per minute.
REAL GAZ supplies industrial and laboratory units, with flowmeter tubes, needle valves or fixed orifices, all prepared for oxygen service.
REAL GAZ supplies industrial and laboratory units, with flowmeter tubes, needle valves or fixed orifices, all prepared for oxygen service.
Flow-type regulators are calibrated for a particular gas, so check that the scale is marked for oxygen and that the outlet pressure matches the calibration point. Typical industrial ranges are 0–10, 0–25 and 0–50 l/min, and larger units serve furnace and burner feeds. Components must be oil-free, and flowmeter tubes should be protected from sudden pressure surges. This guide covers industrial and laboratory equipment only; regulators for medical use are a different class governed by EN ISO 10524 and must come from an appropriate manufacturer.
Because oxygen supports combustion, the outlet connection should lead only to equipment designed for it. Use tubing and fittings that are oxygen-compatible, avoid sharp bends where flow could generate friction, and check connections with an oxygen-safe leak detection fluid rather than soap solutions containing oils. After setting a flow, confirm the reading again once the downstream system has settled.
REAL GAZ supplies this equipment in line with EN 837-1, ISO 10156 and related standards, suitable for industrial and laboratory use.
🏭 Where Oxygen Flow Control Regulators Are Used
- ⚙️ Burner enrichment — small oxygen additions raise flame temperature in melting and heating furnaces;
- 🔬 Wastewater treatment — controlled oxygen is injected to support biological treatment stages;
- 🏥 Glass and ceramics — precision flames require repeatable oxygen flows between batches;
- 🚀 Chemical synthesis — oxidation reactions in pilot plants need steady, measured feeds.
💡 Why Choose REAL GAZ
- ✅ Visible flow setting — staff can see and record the actual flow in each run;
- 🧪 Oxygen-ready parts — cleaned wetted surfaces reduce ignition risk;
- 🎯 Flexible capacity — low, medium and high flow ranges cover many process sizes;
- 🔒 Support on selection — we help choose scales, fittings and tubing that suit your oxygen line;
- 📄 Test and inspection record — available with every order on request.
🔬 Quality Control & Safety
- cleaning and inspection of all wetted parts;
- leak testing of seats, seals and connections;
- gauge accuracy and set-point verification;
- protective packing and correct fitting selection.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ advises on the right Oxygen Flow Control Regulator for each process and delivers it with industrial oxygen cylinders to customers across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — control the flow, trust the process.