Oxygen Acetylene Nozzle — hot, concentrated flame for fast piercing and cutting
The Oxygen Acetylene Nozzle is designed for the hottest and most concentrated of the common fuel-gas flames. Acetylene burning in oxygen reaches a very high flame temperature, so cuts start quickly and piercing is fast.
REAL GAZ supplies these nozzles together with dissolved acetylene, which is stored in cylinders filled with a porous mass and acetone, so the nozzle and the gas are chosen as a matched pair.
REAL GAZ supplies these nozzles together with dissolved acetylene, which is stored in cylinders filled with a porous mass and acetone, so the nozzle and the gas are chosen as a matched pair.
Equipment is supplied in accordance with EN ISO 5172, ISO 9012 and ISO 14114 for acetylene regulators, suitable for precision and general cutting.
🏭 Where Oxy-Acetylene Nozzles Are Used
- 🔧 Fast piercing and starting — starting a cut in the middle of a plate, where the intense primary cone heats the spot rapidly;
- 🛠️ Repair and heating — heating bearings, shafts and seized components for removal, with a flame that is easily adjusted to carburising, neutral or oxidising;
- 🚂 Railway and heavy transport — cutting and heating steel on wagons, bogies and track components during maintenance;
- 🎨 Metal art and restoration — shaping and cutting decorative steel where a fine, controllable flame is helpful.
💡 Why Choose REAL GAZ
- ✅ Matched to acetylene — preheat passages are sized for the burning speed of acetylene, which helps prevent flame snap-back;
- 🧪 Strong, steady flame — the nozzle keeps a stable inner cone across the working range of the torch;
- 🎯 Gas and tip together — we can supply acetylene cylinders alongside nozzles, regulators and flashback arrestors;
- 🔒 Safety guidance — our team explains the 1.5 bar working-pressure limit for free acetylene and correct cylinder handling;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- purity checks on dissolved acetylene;
- solvent and porous-mass inspection of cylinders;
- flame test of each nozzle lot;
- leak testing of valves and fittings.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
🔥 Acetylene Handling Notes
- Store and use acetylene cylinders upright and secure them against falling;
- Never exceed the acetylene pressure limit given in the regulator and torch instructions;
- Keep copper content in any fitting within the limits recommended for acetylene service.
⚙️ Trusted Gas Solutions
REAL GAZ supplies the Oxygen Acetylene Nozzle and acetylene cylinders to cutting, repair and fabrication customers across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. If you are moving from propane to acetylene or setting up a new torch, contact our team for guidance on nozzle size, pressures and safe cylinder arrangements.
REAL GAZ — a hot flame, handled safely.