Nozzle PNM KRASS №3 — mid-range size for general plate cutting
The Nozzle PNM KRASS №3 is the general-purpose size in the series, chosen by workshops that regularly cut plate of medium thickness and want one nozzle that handles most daily tasks.
REAL GAZ supplies it as a machined copper-brass part with a cleanly finished seat, so it fits the intended torch head without adaptation.
REAL GAZ supplies it as a machined copper-brass part with a cleanly finished seat, so it fits the intended torch head without adaptation.
Supply is in line with EN ISO 5172, ISO 9012 and EN ISO 9013, for fabrication and structural cutting with oxygen and a suitable fuel gas.
A medium-size nozzle is a good compromise between gas consumption and cutting capacity. It lights easily, holds a stable flame at normal working pressures and leaves enough margin for occasional heavier plate, which is why many shops standardise on this size for daily work.
🏭 Where PNM KRASS №3 Nozzles Are Used
- 🏗️ Building steelwork — cutting medium plate for base plates, stiffeners, flanges and connection details;
- 🚜 Machinery repair — dismantling and refitting parts on excavators, loaders and agricultural machinery;
- 🛢️ Tank and vessel fabrication — cutting shell plates and openings before rolling and welding;
- 🛠️ General workshops — handling the bulk of routine cutting work with a single, familiar nozzle size.
💡 Why Choose REAL GAZ
- ✅ Versatile size — №3 covers a broad middle band of thicknesses, reducing how often nozzles must be changed;
- 🧪 Even preheat — balanced flame passages bring the steel to ignition temperature quickly and uniformly;
- 🎯 Straight oxygen jet — an accurate bore keeps the cut face square, which saves grinding before welding;
- 🔒 Dependable availability — regular stock of this size means a worn nozzle can be replaced without waiting;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- gauge inspection of bore and seat;
- visual check of all preheat orifices;
- flame test before shipment;
- corrosion-resistant, protective packing.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
📋 Using Size №3 Effectively
- Refer to the torch table for the thickness range recommended for №3 and the matching oxygen pressure;
- Preheat the start point until it glows bright orange before opening the cutting oxygen lever;
- Move at an even speed so that the slag falls cleanly from the underside of the plate.
⚙️ Trusted Gas Solutions
REAL GAZ supplies the Nozzle PNM KRASS №3 with oxygen, acetylene and propane to workshops and contractors in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Our team can confirm torch compatibility and propose a spare-nozzle stock that matches your cutting volume.
REAL GAZ — the everyday nozzle, done right.