Nozzle PNM KRASS №1 — size 1 cutting nozzle for manual propane-oxygen torches
Nozzle PNM KRASS №1 from REAL GAZ is a size 1 cutting nozzle for injector-type manual cutters that burn propane or natural gas with oxygen. It is the usual choice for light-gauge steel plate, sheet offcuts and quick preparation work at the bench.
The bore is drilled and finished to give a straight cutting oxygen jet and an even ring of preheating flames.
The bore is drilled and finished to give a straight cutting oxygen jet and an even ring of preheating flames.
Dimensions and thread forms follow common PNM practice, and the product is assessed against the principles of EN ISO 5172 and ISO 9013 cut quality, for workshop and scrap-yard use.
🏭 Where PNM KRASS Nozzles Are Used
- ⚙️ Metal fabrication — trims plate, flat bar and angle iron to size before fitting and welding;;
- ♻️ Scrap processing — cuts light structural scrap into pieces that fit furnace charging boxes;;
- 🔧 Repair workshops — removes seized bolts, worn brackets and damaged panels on vehicles and machinery;;
- 🏗️ Site demolition — lets crews dismantle thin steel sections, ducting and tanks safely at height or ground level..
💡 Why Choose REAL GAZ
- ✅ Compatible fit — the seat and thread suit PNM-type cutter bodies commonly used in the region;;
- 🧪 Heat-stable alloy — the nozzle body is made from copper-based alloy that resists distortion in repeated heat cycles;;
- 🎯 Even flame pattern — carefully sized preheat ports help reduce ragged edges and slag on the underside of the cut;;
- 🔒 Checked before dispatch — gauge checks on the bore and seat catch faulty pieces before they reach the customer;;
- 📄 Product documentation — dimensional inspection data is supplied with every order.
🔧 Selection and Handling Notes
- Size 1 is intended for thin to medium sections, so choose a larger nozzle number for heavy plate rather than running a small nozzle at excessive oxygen pressure;
- Tighten the nozzle nut by hand and then a quarter turn with a spanner, because over-tightening can deform the seat and cause leaks;
- Clear blocked ports with a correctly sized tip cleaner, working straight in without twisting, and never enlarge the hole with drills or nails;
- Let the nozzle cool in air after use, and do not quench it in water, since sudden cooling may crack the copper alloy.
🔬 Quality Control & Safety
- selection of drawn copper and brass stock;
- machining with gauge control of the bore;
- seat inspection for flat, burr-free sealing;
- visual and gas-flow check on sample pieces.
Nozzles are packed individually so that seats and flame ports are protected during road transport.
⚙️ Trusted Gas Solutions
REAL GAZ supplies Nozzle PNM KRASS №1 to workshops, repair depots and industrial distributors in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Pair it with oxygen regulators, propane hoses and safety devices from the same warehouse so that cutting kits arrive complete and ready for use.
Many small workshops buy this nozzle in packs of several pieces, since it is the item most likely to be burnt, blocked or lost during daily work. Keeping spares ready avoids waiting and keeps the cutting bench productive.
REAL GAZ — clean cuts from a well-made nozzle.