INDUSTRIAL CUTTING TORCH 90 DEGREE — right-angle heads for restricted access
The industrial cutting torch 90 degree has its head turned square to the barrel, so the flame points downward while the operator holds the torch level. REAL GAZ supplies it for daily cutting in production and repair.
This layout is natural for cutting flat plate on a bench or floor, because the wrist stays straight and the line of sight along the cut is clear.
This layout is natural for cutting flat plate on a bench or floor, because the wrist stays straight and the line of sight along the cut is clear.
Torches are chosen against EN ISO 5172, ISO 9090 and ISO 5175-1 requirements, aimed at industrial shops and contractor teams.
🏭 Where 90 Degree Industrial Cutting Torches Are Used
- 📐 Bench cutting — sheet and plate are profiled along marked lines;
- 🧱 Foundry fettling — gates and risers are cut off castings;
- 🛠️ Rail and track work — worn fittings are removed in cramped trackside spaces;
- ⚓ Port equipment repair — corroded plate on cranes and hoppers is cut out for patching.
💡 Why Choose REAL GAZ
- ✅ Straight wrist — the head angle reduces fatigue on long jobs;
- 🧪 Good visibility — the operator can follow the cut line more easily;
- 🎯 Even cut quality — a steady hold gives better kerf consistency;
- 🔒 Rugged head — thick brass walls resist impact and heat;
- 📄 Supplier documentation — supplied with every order, together with gas Certificates of Analysis (CoA) where cylinders are included.
🔧 Handling & Technical Notes
Match the torch size to the thickness range. Acetylene suits fast starts and thinner plate, while propane with the correct tip often suits thicker, longer cuts. Keep a fire watch and a suitable extinguisher near hot work, remove flammable materials from the area, and wear proper eye protection with a shade suited to gas cutting.
Cut quality depends on travel speed, tip distance and angle as well as the torch itself. Hold the tip about 3 to 5 mm above the plate, begin at the edge or at a pierced hole, and move at a speed that keeps the slag leaving cleanly from the underside of the cut. Practice on offcuts helps new operators develop a steady hand before they work on valuable material.
- tip size matched to thickness;
- fire watch and extinguisher;
- eye protection with suitable shade.
🔬 Quality Control & Safety
- incoming inspection of valves, seats and threads;
- gas tightness checks before dispatch;
- oxygen-clean handling of all fittings;
- pressure integrity checks on cylinders supplied with the set.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ supplies the industrial cutting torch 90 degree to fabricators, foundries and repair teams across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, along with cylinders and accessories.
REAL GAZ — right-angle control for everyday plate work.