Industrial Ar-N₂ Gas — dependable inert gas for everyday production
Industrial Ar-N₂ Gas from REAL GAZ is a practical inert mixture for plants that need a protective atmosphere without paying for ultra-pure grades. Argon dominates the mixture, with nitrogen added to tune cost and behaviour.
The gas is supplied in standard cylinders and in bundles for higher demand.
The gas is supplied in standard cylinders and in bundles for higher demand.
Production adheres to ISO 6142 blending principles and gas is analysed against ISO 17025 style procedures for industrial buyers and laboratory auditors.
🏭 Where Industrial Argon–Nitrogen Gas Are Used
- 🏭 Metal fabrication — inert cover for cutting and welding of non-ferrous parts;
- 🔥 Sintering — press-formed powder parts are heated in protective atmospheres;
- 🧴 Packaging lines — inert fill reduces product oxidation;
- 🧪 Process purging — tanks and reactors are purged before start-up.
💡 Why Choose REAL GAZ
- ✅ Fit for purpose — grades are selected for process tolerance;
- 🧪 Analysed lots — each lot has a test result;
- 🎯 Flexible supply — cylinders, bundles and racks;
- 🔒 Dependable service — planned deliveries aim to prevent line stoppages;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- purity checks of component gases;
- gravimetric blending;
- moisture analysis;
- pressure and leak testing.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
📦 Grades, Cylinders & Handling
- 📌 Purging — purge with at least several volumes of gas to clear air;
- 📌 Bundles — use a manifold with non-return valves;
- 📌 Sensors — fit oxygen alarms in confined areas;
- 📌 Cylinder ageing — check test dates regularly.
🧭 Everyday Operation and Safety
Argon and nitrogen are non-toxic, but they are asphyxiants because they displace oxygen. In small, closed rooms, a leak can reduce oxygen quickly without any smell or warning. Use fixed oxygen sensors where gas is stored or consumed in volume, keep ventilation running, and train staff to recognise early signs such as dizziness. Secure cylinders with chains, close valves when equipment is idle, and inspect hoses regularly for cracks. At the end of a shift, a leak-down check of the manifold highlights small losses that waste gas. These routines protect people and keep the cost of gas under control. Review gas consumption monthly; a sudden rise usually points to a leaking joint rather than a change in production. Combining this mixture with a stable regulator and a simple flow meter at each station gives operators a visible, repeatable setting and reduces waste across the whole shop floor. Keep spare regulators, washers and hose clamps in a labelled box near the gas store, so minor faults are fixed quickly and a production line is not held up by a small missing part.
⚙️ Trusted Gas Solutions
REAL GAZ provides Industrial Ar-N₂ Gas to manufacturers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, with consistent quality in each order. Account managers help plan cylinder numbers and exchange cycles.
REAL GAZ — everyday inert gas, engineered for industry.