Industrial Ar-CO₂ Gas — argon-CO₂ gas for production and fabrication
Industrial Ar-CO₂ Gas from REAL GAZ is made for workshops and factories that use shielding gas every day and want it consistent from one delivery to the next.
The mixture is supplied in standard cylinders and bundles with clear labelling and a composition certificate when required.
The mixture is supplied in standard cylinders and bundles with clear labelling and a composition certificate when required.
Production is controlled under ISO 9001, with welding grades classified by EN ISO 14175 and cylinder handling in line with EN 13365 for bundled and single cylinder supply.
A reliable gas supply starts with correct installation. Position cylinders away from heat, secure them with chains or brackets, and connect them to a regulator suited to the gas and pressure. Fit a flashback arrestor where the equipment calls for one, and check connections with an approved leak-detection fluid rather than a flame. In packs and manifolds, use pipework rated for the working pressure and keep it clean and dry so that moisture does not reach the torch.
Typical industrial applications use between 8 and 20 litres of gas per minute while welding is in progress, so consumption can be estimated by multiplying arc-on time by flow rate. REAL GAZ can help you calculate this and propose a delivery frequency that keeps stock sufficient without tying up cash or floor space in unnecessary cylinders. For new customers, a trial delivery of a small number of cylinders is a practical way to confirm that the mixture, valve outlet and handling arrangements all suit your plant before a standing order is agreed.
🏭 Where Industrial Ar-CO₂ Gas Are Used
- 🏭 Series production — automated cells produce identical parts only when the gas composition remains stable;
- 🏗️ Construction steelwork — on-site and workshop welds of columns, trusses and platforms;
- 🧯 Boiler and tank making — welds on pressure parts are inspected, so consistent gas supports passing results;
- 🛠️ General engineering — jobbing shops move between materials and thicknesses with a single flexible mixture.
💡 Why Choose REAL GAZ
- ✅ Stable composition — analysis of each batch confirms the mix is as ordered;
- 🧪 Convenient formats — single cylinders and packs reduce changeovers;
- 🎯 Application advice — technical staff recommend ratios for your materials;
- 🔒 Dependable service — planned delivery runs keep your stock level steady.
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- verification of cylinder status;
- gravimetric and flow-controlled blending;
- moisture and impurity analysis;
- leak and pressure integrity testing.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
Plant managers value gas that does not make the news, and Industrial Ar-CO₂ Gas from REAL GAZ aims for exactly that. We supply fabricators, engineering firms and factories in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, with transport rules and labelling observed on every delivery.
REAL GAZ — Industrial strength, consistent supply.