Industrial and Laboratory Gas Cylinders — one supplier from the workshop to the analyser
Many sites need both a heavy production gas and an ultra clean analytical gas, and Industrial and Laboratory Gas Cylinders from REAL GAZ let you source both from one account.
Industrial grades are filled for volume and cost efficiency, while laboratory grades such as 5.0 and 6.0 are filled in dedicated, conditioned cylinders with low-dead-volume valves.
Industrial grades are filled for volume and cost efficiency, while laboratory grades such as 5.0 and 6.0 are filled in dedicated, conditioned cylinders with low-dead-volume valves.
Purity statements are verified by analytical methods that follow ISO 17025 practice and mixtures are prepared under ISO 6142, so laboratory and quality control departments can rely on every label.
A laboratory rarely needs the same volume as a plant, yet it needs far tighter control over what comes out of the cylinder. For that reason REAL GAZ prepares laboratory cylinders in a separate filling area with its own manifold, vacuum pump and dedicated hoses. Cylinders are purged between fills, valves with stainless diaphragms are available, and every batch is analysed for oxygen, moisture, hydrocarbons and the specified main component. Industrial cylinders go through a streamlined but equally safe route. Customers with both needs often keep one regulator type for each family so that analytical lines stay clean and production lines stay robust.
🏭 Where Industrial and Laboratory Cylinders Are Used
- 🧫 Quality control labs — nitrogen and helium carrier gases support GC and LC-MS work in food, pharma and petrochemical testing;
- 🏭 Production lines — argon and nitrogen cylinders provide inerting and shielding on lines that sit next to the laboratory;
- 🌍 Environmental monitoring — zero air and span gases keep stack and ambient analysers within their calibration limits;
- 🎓 Universities and research — small cylinders of hydrogen, argon and carbon dioxide serve teaching benches and pilot experiments.
💡 Why Choose REAL GAZ
- ✅ Two grades, one contact — a single delivery route covers both bulk-style cylinders and analytical grade packs;
- 🧪 Clean cylinder preparation — laboratory cylinders are evacuated and purged before filling to protect purity;
- 🎯 Sizes for every bench — from 2 and 10 litre bottles for benches up to 50 litre cylinders for central supply;
- 🔒 Segregated stock — industrial and analytical cylinders are stored apart to avoid any mix-up;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
📦 Choosing the Right Grade
- grade 4.5 or 5.0 for general chromatography and inerting of sensitive samples;
- grade 6.0 for trace analysis where detector baseline noise matters;
- industrial grade for purging, pressure testing and general shop use;
- line filters and stainless regulators to keep the delivered purity at the point of use.
🔬 Quality Control & Safety
- multi-stage purification and cleaning of every vessel;
- precision gravimetric filling and weight checks;
- moisture & impurity analysis before release;
- leak testing and pressure integrity checks.
Cylinders and vessels comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ serves laboratories, factories and universities in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Whether you need Industrial and Laboratory Gas Cylinders for a single analyser or a whole campus, we can plan a delivery rhythm and a gas manifold that fit your consumption.
REAL GAZ — from the shop floor to the sample vial.