High Purity R-32 Distributor — verified purity through a trusted channel
As a high purity R-32 distributor, REAL GAZ connects producers of quality difluoromethane with customers who need verified composition and dependable local service. Purity matters because trace water causes acid formation in refrigerant circuits, while non-condensable gases raise head pressure and reduce efficiency.
We check incoming and outgoing lots rather than simply passing cylinders along.
We check incoming and outgoing lots rather than simply passing cylinders along.
Our distribution is supported by testing in line with ISO 17025 principles and refrigerant specifications such as AHRI 700 and ISO 817, for OEM and laboratory customers.
A distributor adds value by testing and by listening. We sample lots on receipt, compare the results with the supplier's certificate and keep the data linked to cylinder numbers. If your specification is stricter than the standard commercial grade, tell us the limits for moisture, acidity, residue and non-condensables, and we will source or select material that meets them rather than promising it blindly. Distribution also means careful storage: cylinders are kept upright, protected from heat and rotated so that older lots are dispatched first. Retained samples and analytical records remain available for review, which supports complaint handling and gives your own auditors confidence in the supply chain.
🏭 Where High Purity R-32 Is Needed
- ⚙️ Compressor manufacturers — run-in and endurance tests demand refrigerant with very low moisture;
- 🔬 Heat pump developers — performance mapping depends on repeatable fluid properties;
- 🏥 Calibration services — reference quantities of pure R-32 help verify leak-detection equipment;
- 🚀 Premium service companies — contractors working on sealed systems use higher-grade product to protect warranty.
💡 Why Choose REAL GAZ
- ✅ Lot verification — purity and moisture are confirmed before material is released to customers;
- 🧪 Local availability — stock held in the region shortens lead times compared with direct import;
- 🎯 Technical dialogue — you can discuss specification limits with specialists, not just order clerks;
- 🔒 Traceable chain — batch numbers connect each cylinder to its origin and test record;
- 📄 Certificate of Analysis (CoA) — provided with each cylinder, stating measured purity and impurity limits.
📊 Purity And Specification Notes
- Typical refrigerant-grade specifications call for purity of at least 99.9 % by weight;
- Moisture is usually limited to a few ppm by weight, and acidity to under 1 ppm;
- Non-condensable gases in the vapour phase should be tiny, often under 1.5 % by volume;
- Higher grades may add limits on unsaturated and halogenated impurities;
- Always compare the specification on the CoA with your own acceptance criteria.
🔬 Quality Control & Safety
- multi-stage purification and drying;
- gas chromatography purity analysis;
- moisture and acidity measurement;
- leak testing and pressure integrity checks.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ operates as a high purity R-32 distributor for customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Share your target specification and we will confirm which lots and cylinders can meet it.
REAL GAZ — purity you can verify.