High Purity Argon CO₂ Distributor — distribution of high purity argon-CO₂ mixtures
As a High Purity Argon CO₂ Distributor, REAL GAZ supplies mixtures built from argon of 99.999% (5.0) purity and carbon dioxide of 99.99% or better, so that the base gases add minimal contamination.
These grades suit users whose results would be affected by oxygen, moisture or hydrocarbon traces.
These grades suit users whose results would be affected by oxygen, moisture or hydrocarbon traces.
Purity is verified by trace analysis of oxygen, moisture and hydrocarbons, with composition checked in line with ISO 6143 and quality records kept under ISO 9001 for analytical and electronics-related customers.
Purity is expressed in the grade number. Argon 5.0 means 99.999% and leaves at most 10 ppm of total impurities, while carbon dioxide 4.5 means 99.995%. For critical uses, the mixture is certified for oxygen below 2 ppm and moisture below 3 ppm, and these values are printed on the certificate. Stainless steel regulators with metal diaphragms and electropolished tubing keep the gas clean at the point of use, because plastic hoses and elastomer seals allow air and water to permeate slowly.
Distribution services cover regular standing orders for laboratories, emergency top-ups when a calibration cylinder runs out unexpectedly, and consolidated deliveries together with other specialty gases. Cylinders are capped, bagged where required and transported upright so that contamination is kept out until the moment of connection. For the most sensitive work, REAL GAZ can also recommend point-of-use purifiers and leak-tight tubing so that the purity measured at the cylinder is the purity reached at the instrument.
🏭 Where High Purity Argon-CO₂ Mixtures Are Used
- 🔬 Gas chromatography — carrier and calibration mixtures where baseline noise from impurities must be minimal;
- 💎 Electronics and thin films — controlled atmospheres in coating and deposition chambers that are sensitive to oxygen and water;
- 🧬 Biotechnology — incubator and process gas blends for cell culture equipment calibrated against a pure reference;
- 🛠️ Precision welding — TIG and laser welding of thin stainless components where discolouration must be avoided.
💡 Why Choose REAL GAZ
- ✅ Low impurity levels — oxygen, moisture and total hydrocarbons are reported on the certificate;
- 🧪 Dedicated equipment — high purity filling uses cylinders and lines kept separate from general-grade production;
- 🎯 Reliable distribution — regular shipments mean laboratories are not left without reference gas;
- 🔒 Contamination control — valve protection and sealed fittings keep the gas clean between filling and use.
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- evacuation and purging of every cylinder;
- trace oxygen and moisture analysis;
- gravimetric blending in clean lines;
- helium leak testing of valves.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
Reliable analytical results begin with clean gas, and as your High Purity Argon CO₂ Distributor REAL GAZ keeps the chain from filling to delivery under control. Laboratories and manufacturers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA can request stock grades or a mixture prepared to a particular impurity limit.
REAL GAZ — Purity you can measure.