High Pressure Argon Gas — argon at 200 and 300 bar for long-running supply
High Pressure Argon Gas from REAL GAZ packs more gas into the same cylinder footprint, cutting the number of changes and the labour that goes with them.
Fill pressures of 200 bar are standard, with 300 bar equipment available for suitable applications.
Fill pressures of 200 bar are standard, with 300 bar equipment available for suitable applications.
High-pressure cylinders conform to ISO 9809-2, EN ISO 11120 and TPED, with valves rated per EN ISO 10297 for industrial duty.
Higher pressure matters in applications such as pressure testing, isostatic pressing and high-flow cutting. It also reduces cost per cubic metre for large users. Regulators and hoses must be rated for the cylinder pressure, so REAL GAZ recommends two-stage regulators and burst-rated connections. Every fill is temperature-corrected so the delivered quantity matches the specification.
Operating at high pressure demands appropriate equipment and discipline. Use only components marked for the working pressure, never adapt fittings, and open valves slowly to avoid adiabatic heating in the regulator. Hoses should be inspected regularly for cracks and replaced on a schedule, not on failure. Where a process uses 300 bar, a pressure relief device and a protective enclosure are good practice. REAL GAZ can supply suitable regulators and gauges, and explain the safe start-up sequence. Training notes on pressure safety are available for new operators, covering inspection routines, emergency steps and correct shutdown of high-pressure lines. Inspection records for regulators and hoses can be kept in the same register as your cylinder data, giving safety officers one clear view of the entire installation.
🏭 Where High Pressure Argon Is Used
- ⚙️ Hot isostatic pressing — argon pressurises vessels to consolidate powders and heal casting defects;
- 🔬 Pressure testing — inert argon is used to test valves and vessels where air is unsuitable;
- 🏥 Laser and plasma cutting — high-pressure argon assists clean cuts in stainless and titanium;
- 🚀 Extrusion and moulding — argon protects metal during hot forming and sintering.
💡 Why Choose REAL GAZ
- ✅ Fewer changes — more gas per cylinder means less downtime;
- 🧪 Dry argon — low moisture avoids corrosion in high-pressure systems;
- 🎯 Compatible equipment — regulators, hoses and fittings advised by our team;
- 🔒 Rated components — every part in the supply chain is pressure-rated;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- pressure vessel testing;
- temperature-corrected filling;
- moisture analysis;
- leak and burst-rated hose checks.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards; high-pressure equipment must only be handled by trained staff.
⚙️ Trusted Gas Solutions
REAL GAZ delivers High Pressure Argon Gas to industrial and research clients in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — high pressure, handled with care.