High Pressure Ar Shield Gas Cylinder — 200 bar argon shield gas cylinders for longer runs
A High Pressure Ar Shield Gas Cylinder from REAL GAZ stores more gas in the same footprint, reducing changeovers during long welding shifts.
Cylinders are made to recognised standards and individually tested before filling.
Cylinders are made to recognised standards and individually tested before filling.
Filling to 200 bar rather than 150 bar increases deliverable gas by roughly one third from the same cylinder volume. Higher pressure demands correctly rated regulators, hoses and valves, so we confirm the equipment rating before supply. Seamless steel cylinders to ISO 9809-1 or ISO 9809-3 are marked with test pressure, tare weight and inspection date, and must be handled upright and secured at all times.
Take care with the equipment attached to a 200 bar cylinder. The regulator must carry a high-pressure inlet gauge scaled above the fill pressure, hoses must be rated for the working pressure on the outlet side, and fittings must match the valve connection standard in your country. Inspect for damage regularly, tighten connections by hand and spanner without over-torquing, and open the valve slowly to prevent adiabatic heating of the regulator. Periodic inspection of high-pressure cylinders follows national rules, and expired units are removed from circulation.
REAL GAZ supplies this product according to ISO 9809, EN 1964, TPED and ADR, suitable for industrial high consumption use.
🏭 Where High Pressure Ar Shield Cylinders Are Used
- 🏭 Continuous production — fewer cylinder changes mean less downtime on busy welding lines;
- 🚧 Remote sites — greater gas capacity per trip reduces transport frequency;
- 🔗 Manifold systems — high-pressure cylinders feed central regulation for multiple stations;
- 🚢 Shipyards and heavy fabrication — long weld runs on large structures need uninterrupted gas supply.
💡 Why Choose REAL GAZ
- ✅ More gas per cylinder — 200 bar fill extends working time between changes;
- 🧪 Inspected cylinders — hydrostatic test status and valve condition are verified;
- 🎯 Equipment matching — we confirm that regulators and hoses are rated for the pressure;
- 🔒 Safe transport — cylinders are secured and handled according to ADR requirements;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- verification of test pressure and inspection date;
- pressure-staged filling with temperature control;
- gas quality check;
- leak testing and valve protection.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
Companies that choose a high pressure Ar shield gas cylinder from REAL GAZ in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA gain longer run times and fewer logistics stops. Please always use regulators rated for the full cylinder pressure and keep valves free of oil and grease.
REAL GAZ — More capacity, fewer interruptions.