Helium for Balloons and Industrial Use — lift for celebrations, gas for production
Helium for balloons and industrial use from REAL GAZ covers two quite different needs with one safe, non-flammable gas: floating latex and foil balloons at events, and supplying factories that need an inert atmosphere.
Because helium is about seven times lighter than air, a modest cylinder fills many balloons, and the same product can then be reused for purging and shielding in workshops.
Because helium is about seven times lighter than air, a modest cylinder fills many balloons, and the same product can then be reused for purging and shielding in workshops.
REAL GAZ supplies this product according to EN ISO 14175, EN 1964 and related standards, suitable for industrial and event use.
A 20-litre cylinder at 200 bar fills roughly 140 standard 23 cm (9 inch) latex balloons, and larger 50-litre cylinders suit exhibitions, shopping centres and wedding suppliers. Balloon filling needs a regulator with a fill nozzle and a gauge, and helium should never be inhaled directly from a cylinder or balloon. In factories, the same gas is used for pressure testing and leak checking of sealed parts.
Safety remains simple but important: helium is not toxic, yet it displaces oxygen in small rooms, and a cylinder pressurised to 200 bar can become a projectile if the valve is knocked off. Always keep the protective cap on during transport, use a trolley, and fill balloons in well-ventilated spaces. Never allow children to handle cylinders, and never inhale helium directly from a cylinder or balloon, as this can cause fainting or serious injury.
🏭 Where Helium for Balloons and Industry Is Used
- ⚙️ Event decoration — party shops and decorators inflate latex and foil balloons for weddings, openings and shows;
- 🔬 Weather and research balloons — small meteorological balloons rise on helium to carry sensors to altitude;
- 🏥 Pressure and leak testing — manufacturers fill tanks, pipes and heat exchangers with helium and sniff for escape;
- 🚀 Cooling and purging — helium's high thermal conductivity helps cool parts and flush lines in controlled processes.
💡 Why Choose REAL GAZ
- ✅ Two uses, one supplier — order event and industrial gas together and keep one account;
- 🧪 Right-sized cylinders — 10, 20 and 50-litre sizes match party stock rooms and plant needs;
- 🎯 Honest advice — we explain fill volumes, regulators and safe indoor handling clearly;
- 🔒 Dry, clean gas — low moisture helps latex balloons float longer and keeps test circuits clean;
- 📄 Certificate of Analysis (CoA) — supplied on request with every industrial order.
🔬 Quality Control & Safety
- purification of the source helium before filling;
- controlled filling to the rated working pressure;
- verification of purity and moisture;
- leak testing and visual cylinder inspection.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards, with valves protected by caps.
⚙️ Trusted Gas Solutions
REAL GAZ supplies helium for balloons and industrial use across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, from single event cylinders to regular supplies for production sites.
REAL GAZ — from celebrations to production lines.