Heavy Duty Cutting Torch — built for thick plate and long working days
A heavy duty cutting torch from REAL GAZ is chosen for thick plate, castings and forged sections where a light torch would run out of flow or overheat.
Because gas consumption rises quickly with thickness, we help you plan cylinder packs or manifolds that sustain the flow.
Because gas consumption rises quickly with thickness, we help you plan cylinder packs or manifolds that sustain the flow.
Selection draws on ISO 5172, ISO 7291 for manifold regulators and EN ISO 9539 for heavy industry and scrap processing.
🏭 Where Heavy Duty Torches Are Used
- ⚓ Ship recycling — sectioning thick hull plate and frames;
- 🏭 Steel mills and foundries — removing risers, gates and slag build-up from castings;
- 🏗️ Bridge and tower work — cutting heavy structural members during modification;
- ⚒️ Press and tool shops — trimming large forgings and thick tooling blanks.
💡 Why Choose REAL GAZ
- ✅ Robust build — designed to tolerate heat, spatter and rough site handling;
- 🧪 High-flow gas supply — cylinder packs and manifolds sustain oxygen demand for long cuts;
- 🎯 Nozzle matching — tips are recommended according to thickness and fuel gas;
- 🔒 Operator protection — we advise on shielding, PPE and arrestors rated for the flow in use;
- 📄 Product documentation — supplied with every order.
🔬 Quality Control & Safety
- torch body and valves inspected for wear;
- check of oxygen lever and cutting oxygen tube alignment;
- verification that regulators have sufficient flow capacity;
- reminder to keep a fire watch after hot work.
Cylinders and equipment are supplied in line with ADR / UN transport rules and relevant EN/ISO standards.
📦 Planning Gas Flow for Thick Steel
Cutting thick steel can draw large volumes of oxygen, and a regulator that is too small will starve the torch and give ragged edges.
- choose regulators and hoses with ample flow capacity;
- consider cylinder packs or bulk supply for continuous work;
- use larger nozzles only with matched fuel gas flow;
- pre-heat the start point thoroughly before opening the cutting oxygen.
Heavy sections also retain heat, so allow cooling time, support the offcut safely and keep combustible material well clear of the work area.
📋 How to Order
When you contact REAL GAZ about Heavy Duty Cutting Torch, please send the heaviest section you cut, the hours of cutting per shift and the available gas storage space. With these details our team can reply quickly with a torch and nozzle set sized for the flow your jobs require, and can also quote the oxygen, acetylene, propane or other cylinder gases that your work consumes.
Orders are prepared with careful inspection, secure packing and clear handling instructions, so that equipment arrives ready for installation and your operators can start work with confidence. Our engineers are also available to answer questions about safe use, storage, maintenance intervals and replacement parts after delivery.
⚙️ Trusted Gas Solutions
REAL GAZ delivers to heavy industry in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. If you need a heavy duty cutting torch together with a gas supply that keeps pace, we can quote a torch, nozzle set and cylinder pack or manifold solution.
REAL GAZ — power for the thickest cuts.