GAS WELDING SLEEVE 9,0 MM — 9,0 mm bore hose for oxy-fuel work
Gas welding sleeve 9,0 mm is a rubber hose with a 9,0 mm bore for delivering oxygen, acetylene, propane or other fuel gases to a torch.
Its braided reinforcement keeps the bore stable under working pressure while the cover protects against wear.
Its braided reinforcement keeps the bore stable under working pressure while the cover protects against wear.
Always match the hose to the gas: use hose rated for fuel gas on fuel lines, and keep oxygen hose free from oil and grease. Fit the correct clamps and check every joint for leaks with a suitable leak detection fluid.
Our gas welding sleeve 9,0 mm range is chosen for general-purpose work, and we can advise whether a larger bore would suit your heaviest nozzles. Spare lengths should be stored coiled loosely, capped and away from sunlight, oil and heat sources.
Before first use, blow through the hose with clean dry nitrogen or oil-free air to clear dust, then connect it to the regulator and torch and pressure test the joints. Never use grease or oil on fittings, and never repair a damaged hose with tape.
REAL GAZ supplies this product according to EN ISO 3821 and ISO 14113 guidance, suitable for industrial and workshop use.
🏭 Where Gas Welding Sleeves Are Used
- ⚙️ Acetylene cutting — steel plate cutting with a medium or large nozzle depends on steady fuel gas flow, which a stable 9,0 mm bore helps to provide;
- 🔬 Propane heating — bending and straightening plate and pipe with propane torches needs hose rated for liquefied petroleum gas service;
- 🏥 Brazing and soldering — joining copper pipe in heating and cooling installations uses short lines that need to bend easily around obstacles;
- 🚀 Demolition work — cutting steel in dismantling projects exposes hose to dirt, falling debris and sharp edges, so a strong cover is essential.
💡 Why Choose REAL GAZ
- ✅ Stable bore — reinforcement keeps the diameter constant under pressure;
- 🧪 Gas-specific options — versions for oxygen and for fuel gases are offered;
- 🎯 Reliable seal — fits standard hose tails securely with ordinary clamps;
- 🔒 Supply support — we advise on working pressures, lengths and replacement intervals;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- pressure testing of samples;
- dimension checks on bore and wall;
- inspection of cover for defects;
- protective caps on both ends.
Cylinders and gas equipment comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ delivers the hose to customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, together with cylinders, regulators and fittings, so you can collect everything for a gas welding station in a single order.
REAL GAZ — Nine millimetres of dependable flow.