Gas Nozzle for Cutting Torch — correct fit, flame and spare-parts support
Selecting a Gas Nozzle for Cutting Torch is mainly a question of compatibility: the thread, seat and length must fit the torch head, and the bore and preheat pattern must suit the fuel gas and metal thickness.
REAL GAZ helps customers identify the correct replacement, which avoids leaking joints, uneven flames and the false economy of forcing an ill-fitting tip.
REAL GAZ helps customers identify the correct replacement, which avoids leaking joints, uneven flames and the false economy of forcing an ill-fitting tip.
Compatibility advice refers to EN ISO 5172, ISO 9012 and ISO 3821 for gas hose connections, and covers injector and equal-pressure torches.
Torches are broadly either injector type, which draw fuel gas into the mixer using the oxygen stream, or equal-pressure type, which receive both gases at working pressure. The two designs use different nozzle geometry, so never assume that a nozzle from one design will perform correctly in the other.
🏭 Where Replacement Nozzles Are Needed
- 🔁 Routine replacement — changing nozzles that have become worn, flared or clogged, to restore a clean flame and cut;
- 📏 Changing the work thickness — moving to a larger or smaller size when the plate being cut changes;
- ⛽ Switching fuel gas — changing from acetylene to propane or the reverse, which usually calls for a different nozzle design;
- 🏭 Fleet and shop standardisation — standardising on a nozzle range across several torches to simplify stock-keeping.
💡 Why Choose REAL GAZ
- ✅ Fit checking — send the torch model or a photograph of the old tip and we will confirm the matching nozzle;
- 🧪 Tight sealing — correctly machined seats seal metal-to-metal, so no sealing compounds are needed;
- 🎯 Right size and fuel — we advise on the number, thickness range and fuel type so the first replacement is the right one;
- 🔒 Reduced downtime — keeping a small stock of correct spares prevents lost shifts due to damaged tips;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- thread pitch and seat angle gauging;
- bore and passage inspection;
- functional flame test on sample nozzles;
- packing in groups by size and type.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
🔍 Signs a Nozzle Needs Replacing
- Rounded or enlarged orifice openings that give a ragged flame;
- A cutting-oxygen jet that spreads or deflects, leaving a wide kerf and slag on the underside;
- Repeated backfiring or a nozzle that no longer seals on its seat.
⚙️ Trusted Gas Solutions
REAL GAZ stocks the Gas Nozzle for Cutting Torch range along with cutting gases, regulators and hoses for customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. Send us your torch details and required thickness range, and our team will propose the most suitable replacement and a sensible quantity of spares.
REAL GAZ — the right fit, first time.