Freon R-410A Gas Cylinder — a complete cylinder solution for the technician
A Freon R-410A Gas Cylinder from REAL GAZ combines the refrigerant, a tested vessel and a labelled valve, ready for field or workshop use.
The cylinder and its contents are matched, and the fill weight is recorded.
The cylinder and its contents are matched, and the fill weight is recorded.
Cylinders are built to ISO 9809 or equivalent and carry TPED marks, with transport per ADR, suitable for mobile and workshop service.
🏭 Where R-410A Cylinders Are Used
- 🛠️ Call-out repairs — engineers recharge after replacing a compressor or fixing a coil leak;
- 🚛 Mobile workshops — service vehicles carry cylinders racked and restrained;
- 🏭 Maintenance stores — plant stores hold a weighed reserve for breakdown response;
- 📋 Commissioning — contractors record exact weight charged for the warranty file.
💡 Why Choose REAL GAZ
- ✅ Clear fill record — net weight is documented so you know what you are charging;
- 🧪 Dry gas — moisture control protects expansion valves;
- 🎯 Convenient valves — outlets suit usual gauge manifold hoses;
- 🔒 Robust vessel — cylinders are checked for corrosion, dents and neck damage;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- external inspection for rust and impact marks;
- internal dryness check after evacuation;
- controlled fill by weight;
- leak test with detector fluid or electronic detector.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
Place a cylinder on scales during charging; recorded weight is the most reliable way of delivering the manufacturer's stated charge. Use the liquid line for charging where the manifold allows, and avoid overfilling a cylinder during recovery, which is limited to about 80 % of its water capacity. Mark recovered cylinders clearly, and never reuse a disposable vessel.
Good habits make a cylinder last. Wipe the valve outlet before connecting, use a fresh seal in the hose coupling, and close the valve fully after each job before disconnecting. Never leave a cylinder connected to a warm system overnight, and do not stack them horizontally without chocks. Many technicians keep a simple log noting the date, job address and kilograms drawn from each cylinder, which helps with F-gas record-keeping and shows the customer exactly how much refrigerant was added. We can provide a printable log sheet with your order if you wish. New technicians will find our short checklist for connecting, charging and disconnecting especially useful during their first weeks on the road.
REAL GAZ provides the Freon R-410A Gas Cylinder to technicians in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, with all information needed for safe use.
REAL GAZ — One cylinder, one record, one reliable charge.