Freon R-407C Gas Cylinder — ready-to-use refrigerant packaging for service teams
A Freon R-407C Gas Cylinder from REAL GAZ combines the refrigerant and its packaging in one controlled product, filled to a declared mass and sealed for transport.
The contents are the 23/25/52 HFC blend, with zero ozone depletion potential.
The contents are the 23/25/52 HFC blend, with zero ozone depletion potential.
Cylinders follow EN 1964, EN ISO 11114 material compatibility and ADR / UN marking, and contents conform to ISO 817 for service use.
🏭 Where Freon R-407C Cylinders Are Used
- ⚙️ Emergency repair — carrying a single cylinder to a failed rooftop unit or cold room;
- 🔬 Planned maintenance — charging chillers during seasonal inspections;
- 🏥 Installation — adding charge to long pipe runs on split systems;
- 🚀 Conversion work — recharging after an R-22 retrofit with fresh oil and driers.
💡 Why Choose REAL GAZ
- ✅ Declared fill mass — know exactly how much refrigerant you are carrying;
- 🧪 Robust packaging — valves protected by caps, with colour-coded identification;
- 🎯 Right sizes — pack sizes chosen for van loading and for safe manual handling;
- 🔒 Fresh product — dated fills keep refrigerant stock moving and avoids ageing inventory.
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- cylinder condition and thread inspection;
- evacuation to deep vacuum before filling;
- weighed liquid fill;
- final weight and leak verification.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
📘 Technical and Handling Notes
Do not store a partly used cylinder near heat, and never try to refill a disposable one. If liquid must be withdrawn, use a service hose rated for pressure and a manifold that can control flow. Check the valve for oil traces, which can indicate a slow leak. Pressure at 20 °C is approximately 11 bar, and the cylinder must be secured upright during transport so the relief device does not discharge liquid.
Looking after a cylinder in daily work is simple but important. Keep the valve closed when not in use, and fit the protective cap after each job. Wipe the outlet clean before connecting a hose, and replace worn sealing washers rather than overtightening. Do not leave cylinders in a closed vehicle at midday, because the temperature inside can exceed 60 °C. Do not roll or drop cylinders; use a trolley and secure them with a chain or strap. At the end of the day, return unused vessels to a cool, ventilated store away from ignition sources. Cylinders of different sizes are marked clearly, so teams can pick the right vessel quickly from the stockroom without reading small print.
⚙️ Trusted Gas Solutions
REAL GAZ delivers every Freon R-407C Gas Cylinder with batch paperwork to engineers and wholesalers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, and can supply recovery cylinders as well.
REAL GAZ — the full package for a safe refrigerant charge.