Cutter X501 HR 530 mm 90°

Cutter X501 HR 530 mm 90° — long reach and a 90° head for awkward cuts

The Cutter X501 HR 530 mm 90° offered by REAL GAZ combines a 530 mm length with a 90° cutting head, keeping the operator's hands away from heat while reaching into confined or elevated work.
Please confirm the exact model details and nozzle options with our team when ordering.

Guidance follows ISO 5172, EN ISO 9539 and ISO 3821 for maintenance and industrial use.

🏭 Where X501 Cutters Are Used

🔥 Furnace and boiler work — cutting at arm's length near hot or radiant surfaces;
🏭 Foundry operations — removing runners and risers where a short torch would be uncomfortably close;
🛠️ Pipework and vessels — reaching behind flanges, supports and cross-members;
🧱 Demolition — cutting steel from below or beside the operator at a safe distance.

💡 Why Choose REAL GAZ

✅ Extra reach — the 530 mm length improves distance from heat and sparks;
🧪 Right-angle head — the 90° head helps in corners where a straight torch cannot be positioned;
🎯 Application advice — we recommend nozzle size and pressures for your material;
🔒 Safer positioning — operators can cut from a better stance, reducing strain and exposure;
📄 Product documentation — supplied with every order.

🔬 Quality Control & Safety

verification of head angle and tube alignment;
gas-tightness check at head and tube joints;
inspection of nozzle seat condition;
instruction on safe lighting and shutdown.

Cylinders and equipment are supplied in line with ADR / UN transport rules and relevant EN/ISO standards.

📦 Working with a Right-Angle Head

A right-angle head changes how slag and sparks travel, so operators should adjust their stance and protective clothing accordingly.

wear a face shield, leather gloves and flame-retardant clothing;
direct slag away from hoses, cylinders and bystanders;
use the extra length to keep your forearm out of radiant heat;
check that the head and nozzle seat are clean before every shift.

Please send the exact model marking or a photograph of your existing torch so that we can confirm compatibility of nozzles and fittings.

📋 How to Order

When you contact REAL GAZ about Cutter X501 HR 530 mm 90°, please send the existing model number or a photograph of the torch you already use. With these details our team can reply quickly with confirmation of nozzles and fittings that match the 530 mm, 90 degree layout, and can also quote the oxygen, acetylene, propane or other cylinder gases that your work consumes.

Orders are prepared with careful inspection, secure packing and clear handling instructions, so that equipment arrives ready for installation and your operators can start work with confidence. Our engineers are also available to answer questions about safe use, storage, maintenance intervals and replacement parts after delivery.

⚙️ Trusted Gas Solutions

REAL GAZ supplies cutting equipment in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA. For the Cutter X501 HR 530 mm 90°, contact us with your fuel gas and cutting thickness and we will confirm suitable nozzles, hoses and cylinder supply.

REAL GAZ — reach where other torches cannot.