Cutter universal valve KRASS - 535mm/90˚ №2 — size No. 2 for medium to heavy plate
The Cutter universal valve KRASS - 535mm/90˚ №2 combines a 535 mm barrel, a 90 degree head and a size No. 2 cutting set intended for mid-range plate thickness. REAL GAZ offers it for steady daily use.
The number denotes the cutting attachment size, which determines the nozzle range and the oxygen and fuel flow that the torch can deliver.
The number denotes the cutting attachment size, which determines the nozzle range and the oxygen and fuel flow that the torch can deliver.
Use follows EN ISO 5172 and the maker's tip charts, plus EN ISO 2503 regulators, for metal fabrication and shipbuilding work.
🏭 Where KRASS Universal Cutter Valve No. 2 Are Used
- 📏 Medium plate — cutting of structural plate within the stated thickness range;
- 🏭 Production cutting — repeat cuts along templates or rails in the shop;
- ⚙️ Machine repair — damaged brackets and housings are cut away;
- 🏗️ Site erection — beam trimming and temporary fixings are removed.
💡 Why Choose REAL GAZ
- ✅ Right-sized head — No. 2 balances reach, flow and gas use;
- 🧪 Long barrel — hands stay further from heat and sparks;
- 🎯 Clear cutting line — the 90 degree head helps with sighting;
- 🔒 Replaceable nozzles — worn parts are changed without replacing the torch;
- 📄 Supplier documentation — supplied with every order, together with gas Certificates of Analysis (CoA) where cylinders are included.
🔧 Handling & Technical Notes
Check the maker's chart before choosing nozzle size, oxygen pressure and fuel pressure for the plate thickness in use. Too much pressure wastes gas and gives rough edges, while too little leaves the cut incomplete. Keep slag off the barrel and nozzle seat, and never leave the lit torch unattended or hang it on a cylinder valve.
Cutting attachment numbers vary between makers, so always check that nozzles, injectors and the head body belong to the same size system. Mixing parts can lead to poor flames, backfire or leaks at the cone seat. If in doubt about compatibility, send us the markings stamped on the torch, and we will help match replacement nozzles and seals to the correct number.
- use maker's chart for pressures;
- slag removal from nozzle seat;
- never hang a lit torch on a cylinder.
🔬 Quality Control & Safety
- incoming inspection of valves, seats and threads;
- gas tightness checks before dispatch;
- oxygen-clean handling of all fittings;
- pressure integrity checks on cylinders supplied with the set.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
REAL GAZ supplies the Cutter universal valve KRASS - 535mm/90˚ №2 with oxygen, acetylene and propane supply for customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — the right size for steady plate cutting.