Cutter universal valve KRASS - 535mm/90˚ №1 — long-reach universal cutter with a 90° head
The Cutter universal valve KRASS - 535mm/90˚ №1 is a manual oxy-fuel cutter with a 535 mm body and a head set at 90°, which REAL GAZ supplies with oxygen and fuel gas.
The long body keeps the operator’s hand further from heat and sparks, while the right-angle head gives access to cuts that are awkward with a straight torch.
The long body keeps the operator’s hand further from heat and sparks, while the right-angle head gives access to cuts that are awkward with a straight torch.
Equipment and gases are supplied in line with EN ISO 5172, ISO 5175-1 and EN ISO 2503, suitable for industrial and site use.
🏭 Where the KRASS 535 mm Cutter Is Used
- 🔥 Cutting at a distance — the 535 mm body reduces radiant heat on the operator’s hands;
- 📐 Awkward angles — the 90° head reaches into corners, pits and under structures;
- ♻️ Scrap handling — long-reach cutters help operators work around heavy scrap piles;
- 🏗️ Dismantling — steel frames and tanks are cut with better visibility and safe standoff.
💡 Why Choose REAL GAZ
- ✅ Reach and access — the length and head angle improve control in tight places;
- 🧪 Universal use — the №1 size is chosen for general cutting tasks with a suitable nozzle;
- 🎯 Complete supply — nozzles, hoses, arrestors and gas cylinders with the cutter;
- 🔒 Operator safety — a longer handle increases working distance from the flame;
- 📄 Certificate of Analysis (CoA) — supplied with every gas order.
🔬 Quality Control & Safety
- body and valve function checks;
- head angle and seal inspection;
- gas purity verification;
- leak testing and pressure integrity checks.
Gas cylinders supplied with the equipment comply with ADR / UN transport rules and relevant EN/ISO standards.
🛠️ Using a Long-Reach Cutter
- Test the valves and hose connections with leak-detection solution before first use and after any parts change.
- Wear flame-retardant clothing, gauntlet gloves and eye protection suitable for gas cutting.
- Store the cutter with valves closed, hoses coiled and nozzle protected from knocks.
🧯 Operator Protection
A longer cutter helps, but it does not replace protective equipment. Wear flame-retardant overalls without turn-ups, leather boots with covered laces and gauntlet gloves. A face shield with an appropriate shade for gas cutting protects the eyes from glare and sparks. Keep a fire extinguisher and a bucket of sand within reach, and check the area below and behind the work for combustible debris. When working at height, secure the cutter and hoses so that they cannot fall. REAL GAZ can supply gloves, shields and fire-safety accessories with your order, so the cutter and the protective equipment arrive together.
⚙️ Trusted Gas Solutions
REAL GAZ supplies the Cutter universal valve KRASS - 535mm/90˚ №1 and the gases that power it to customers in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — Reach further, cut safer.