Chain Lift Trolley №1

CHAIN LIFT TROLLEY №1 — tilt-and-lift trolley for stairs, ramps and loading areas

The chain lift trolley №1 from REAL GAZ helps operators raise a cylinder onto a vehicle bed, platform or step using a leverage frame, while a chain keeps the cylinder locked to the carrier. It is intended for places where a plain two-wheel truck is hard to use.
Extended handles and a wide rear stop give extra control when the load is lifted over a kerb or a loading edge.

Design and use are guided by EN ISO 12100 and ISO 11625, with the load limit shown on the frame, for loading dock, vehicle and site use.

Typical models weigh 15 to 20 kg and carry cylinders up to 50 litres. The leverage frame lets one operator tilt a loaded cylinder onto a step of about 20 centimetres, while the chain keeps it aligned. Rubber-tyred wheels are recommended for building sites, and solid wheels for smooth dock floors. Please give the step height and cylinder size when enquiring so that we can recommend a suitable model.

🏭 Where Chain Lift Trolleys Are Used

🚛 Truck loading — cylinders are brought up to a tailgate height with less effort;
🏗️ Building sites — cylinders travel over kerbs, kerbs, planks and temporary ramps;
🏢 Basement stores — cylinders are brought up short flights of steps into service yards;
🔧 Rental depots — returned cylinders are lifted onto pallets and racks.

💡 Why Choose REAL GAZ

✅ Leverage assist — the long handle gives mechanical advantage when raising the load;
🧪 Stair skids — wear strips help the trolley slide up and down steps;
🎯 Positive lock — the chain holds the cylinder tight against the frame while it is lifted;
🔒 Reinforced joints — gussets support the frame under repeated lifting.
📄 Certificate of Analysis (CoA) — supplied with every order where the product is a gas; documentation and traceability details accompany equipment.

📦 Handling & Storage Notes

Never use this trolley as a hoist or lift above shoulder height;
Keep feet clear of the wheel path when going down steps;
Make sure the cylinder base is seated before lifting;
Do not exceed the stated load rating.

🔬 Quality Control & Safety

structural load tests including lift cycles;
inspection of pivots and fasteners;
chain and lock testing;
paint and anti-corrosion finishing.

Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.

⚙️ Trusted Gas Solutions

REAL GAZ can supply the chain lift trolley №1 together with cylinders and delivery planning, helping teams in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA to move gas safely from store to point of use.

REAL GAZ — lift, secure, move.