Buy Acetylene Regulator №1 — a dependable regulator for safe, steady acetylene delivery
If you need to buy Acetylene Regulator №1 for a gas welding or cutting station, REAL GAZ supplies single-purpose acetylene regulators with a red-coded outlet, a clamp or yoke-type cylinder connection and a clearly marked working-pressure gauge. Acetylene must never be used above 1.5 bar, so the regulator is built around a low-pressure outlet scale and a dedicated safety relief.
Every unit is leak-tested before dispatch and matched to the cylinder connection standard used in your country, so it can be fitted to dissolved acetylene cylinders without adapters or improvised parts.
Every unit is leak-tested before dispatch and matched to the cylinder connection standard used in your country, so it can be fitted to dissolved acetylene cylinders without adapters or improvised parts.
REAL GAZ supplies acetylene regulators designed to EN ISO 2503, with gauges to EN 837-1 and flashback protection to ISO 5175-1, suitable for workshop and site use.
Acetylene is stored dissolved in acetone inside a porous mass, which is why the cylinder must stay upright and why the draw rate should not exceed one seventh of the cylinder capacity per hour. A regulator for this gas therefore has to be matched to the cylinder size and the torch nozzle. Our staff will ask which nozzle sizes you use, how long cutting runs last and whether you work indoors, then suggest a suitable model, hose and arrestor combination. Customers often add a spare gauge and a set of seals, so a worn part never leaves a station idle.
🏭 Where Acetylene Regulators Are Used
- 🔥 Oxy-acetylene welding — brazing and joining of steel pipework with a stable, low-pressure acetylene feed that keeps the flame neutral;
- ✂️ Flame cutting — heating and cutting of steel plate, where a steady flame depends on a constant outlet pressure;
- 🔧 Maintenance workshops — straightening, heating of seized fasteners and repair work on plant, agricultural machinery and vehicles;
- 🏗️ Construction and shipyards — portable cutting and heating on site, where a robust regulator body withstands knocks, dust and weather.
💡 Why Choose REAL GAZ
- ✅ Acetylene-specific design — the regulator is made for dissolved acetylene and avoids copper-rich parts that can react with the gas;
- 🧪 Clear gauge reading — the contents and working gauges are easy to read so operators can spot a falling cylinder pressure early;
- 🎯 Right fitting every time — we confirm the cylinder valve type before dispatch so the regulator connects without adapters;
- 🔒 Built-in protection — a safety relief and provision for a flashback arrestor reduce the risk of a flame travelling back towards the cylinder.
- 📄 Certificate of Analysis (CoA) — supplied with every order of gas; regulators ship with product documentation.
🔬 Quality Control & Safety
- each regulator is tested for outlet pressure stability across its working range;
- gauge accuracy is checked against a reference standard before packing;
- seats, seals and diaphragms are inspected for damage and contamination;
- external and internal leak tests are carried out at working pressure, and users are reminded never to draw acetylene above 1.5 bar.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
⚙️ Trusted Gas Solutions
When you buy Acetylene Regulator №1 from REAL GAZ, you also gain access to dissolved acetylene cylinders, torches, hoses and flashback arrestors for a complete set-up, with advice on upright storage and safe cylinder handling. We serve fabricators, repair shops and contractors in Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — a steady flame starts at the regulator.