Argon Helium Blend for industrial use — robust shielding and process mixtures for factories
An Argon Helium Blend for industrial use from REAL GAZ is formulated for the daily demands of factory floors: stable composition, dry gas and cylinders that survive handling in busy workshops.
The helium content is chosen to balance heat input, arc stability and cost, and typical industrial blends contain between 20% and 75% helium.
The helium content is chosen to balance heat input, arc stability and cost, and typical industrial blends contain between 20% and 75% helium.
Blends align with EN ISO 14175 for welding applications and are filled into cylinders certified to ISO 9809 and EN 1964 families of standards.
Industrial customers usually choose between three families: Ar + 20–30% He for general fabrication of aluminium alloys, Ar + 50% He for thicker material and higher travel speed, and Ar + 70–75% He for copper, heavy plate and mechanised lines. Cylinders of 50 litres at 200 bar are the standard format, with packs for continuous operations. Where several welding stations share a single supply, we can recommend a manifold arrangement with pressure regulation and non-return protection.
🏭 Where Industrial Argon-Helium Blends Are Used
- 🏭 Metal fabrication — argon-helium shielding gas supports high-productivity welding of thick aluminium and copper alloys;
- 🚗 Automotive components — heat-exchanger and battery-tray welds benefit from the cleaner, hotter arc;
- 🧯 Pressure-vessel manufacturing — deeper penetration reduces the passes needed on thick shells and nozzles;
- 🔥 Casting and foundry — inert blends protect molten non-ferrous metal during transfer and treatment.
💡 Why Choose REAL GAZ
- ✅ Productivity gains — hotter arc and faster travel can shorten cycle times on suitable joints;
- 🧪 Defect reduction — dry gas lowers porosity risk, helping weld inspection results;
- 🎯 Choice of fractions — industrial ratios are matched to material thickness and process;
- 🔒 Robust cylinders — industrial valve guards and sturdy cylinders stand up to workshop use;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- dry gas filling and dew point control;
- periodic composition checks;
- valve guard and cap inspection;
- pressure and leak verification.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
Install cylinders away from heat and mechanical damage, keep them upright and chained, and train staff to open valves slowly. Check regulators for wear at regular intervals and replace flowmeters showing drift, since helium mixtures can reveal minor leaks that argon alone would not.
⚙️ Trusted Gas Solutions
Maintenance managers and production engineers looking for an argon helium blend for industrial use will find REAL GAZ straightforward to deal with: clear specification, consistent supply and technical support. We serve plants across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA.
REAL GAZ — gas that keeps the factory moving.