Acetylene for Welding and Cutting Applications — practical fuel gas for everyday metalwork
Acetylene for Welding and Cutting Applications is one of the core products of REAL GAZ, supplied in dissolved form and ready for use with oxygen in standard torch sets.
Setting the right oxygen-to-acetylene ratio gives a neutral, carburising or oxidising flame, so one gas serves many tasks from silver brazing to heavy-section cutting.
Setting the right oxygen-to-acetylene ratio gives a neutral, carburising or oxidising flame, so one gas serves many tasks from silver brazing to heavy-section cutting.
Our range follows EN ISO 3807, EN ISO 5172 for gas torches and EN ISO 14114, suitable for welders, fitters and fabricators.
🏭 Where Acetylene Is Used
- ✂️ Plate and profile cutting — a pre-heat flame brings steel to ignition temperature before the cutting oxygen jet removes the metal;
- 🔩 Welding thin steel — low-pressure neutral flames weld sheet and tube where TIG equipment is not available;
- 🧯 Brazing and soldering — HVAC and plumbing engineers join copper tube using filler alloys and a gentle carburising flame;
- 🚜 Field repair — mobile service crews use compact acetylene sets to repair farm machinery and construction plant.
💡 Why Choose REAL GAZ
- ✅ Easy start-up — clear instructions on lighting sequence, purging and shut-down help new operators work safely;
- 🧪 Gas for each task — pair acetylene with oxygen from the same supplier to simplify ordering and records;
- 🎯 Torch and tip advice — we help you match tip size and pressures to metal thickness to reduce gas waste;
- 🔒 Protective equipment — flashback arrestors, hoses and goggles are available from the same account;
- 📄 Certificate of Analysis (CoA) — supplied with every order.
🔬 Quality Control & Safety
- multi-stage purification of the gas before filling;
- controlled filling by weight with calibrated scales;
- moisture and impurity analysis;
- leak testing and pressure integrity checks on valves.
Cylinders comply with ADR / UN transport rules and relevant EN/ISO standards.
📦 Handling & Storage of Acetylene
Before lighting a torch, open the cylinder valve slowly, set the working pressure on the regulator, and purge each hose separately for a few seconds. Light with acetylene first, then add oxygen to reach the flame type you need. When finished, close the torch acetylene valve first, then the oxygen valve, shut the cylinder valve and release the pressure from the hoses. Protect hoses from slag and sharp edges, and wear flame-resistant clothing, gloves and shaded eye protection.
⚙️ Trusted Gas Solutions
REAL GAZ supplies Acetylene for Welding and Cutting Applications to workshops, shipyards and contractors across Azerbaijan, Turkey, Georgia, Uzbekistan and the USA, with deliveries, exchanges and on-site advice. New operators can ask our team for a short walk-through of lighting, purging and shutdown before their first job.
Cutting thick plate, for example, calls for a larger tip and higher flows than light sheet work, and choosing correctly saves both gas and time on every job.
REAL GAZ — everything for the flame in one order.